How to install Win XP Using Bootable Usb Stick
How to install Win XP Using Bootable Usb Stick:
If Somebody say hey i donot have Cd-ROM, and how i can install Operating system.. but the Solution is simple describe below.
From these guide line steps tells, How to make a Multiboot USB-Stick, as boot option for MS-DOS, TXT-mode Setup Windows XP.
The USB_Multiboot.cmd Batch Program can now be used for making such Multiboot USB-Drive instead of the Manual procedure .The Attachment gives USB_MultiBoot.zip file,the USB_MultiBoot.cmd program can be used for making
MultiBoot USB-Drive for Install of Windows XP with Extra Boot Options for System Recovery with Ghost.
A. Boot Test: Making Bootable USB-stick or USB-Harddisk, First Test if your PC is Booting from USB-stick:
Step 1:
Use 2GB USB-stick with High Read/Write Speed (e.g. Apacer HT203 )
Step 2:
Download Program - USB_MultiBoot_10.zip
Manually use USB_Multiboot.cmd Batch Program.
Step 3:
Format USB-stick with PeToUSB.exe
Use PeToUSB.exe with Settings: Enable Disk Format with LBA FAT16X.
Step 4:
Copy XP BootFiles from your XP C-drive to USB-stick.
Step 5:
Reboot your PC with USB-stick plugged in and Enter BIOS Setup by pressing [Delete] or F2
and change Boot settings more permanent so that Harddisk is used as first Boot device type
and USB-Drive is seen as first Harddisk. Save BIOS Settings with F10.
B.Testing:
Restart your pc and Run your installation Menu.